Acrylic enamel auto paint, acrylic lacquer, and urethane are the 3 choices the DIY auto painter has at his disposal when starting a new project. This choice can be a daunting one.
No one wants to buy a costly paint only to find out it is the incorrect one. Luckily, with a little research and the right FAQ, any DIY auto painter can easily discern which paint is the right fit. Acrylic enamel auto paint and its cousin acrylic lacquer are the most common choices for restoration projects while urethane is recommended by industry professionals for DIY auto painting projects.
As acrylic enamel auto paint is old technology, one may find themselves drawn to the urethane option. Unfortunately, if you are in possession of an older or classic vehicle, you will most likely be going with the acrylic enamel option. While the base coat/clear coat is strongly recommended by industry professionals, single-stage urethanes are a viable option.
They do not require an application of clear coat to add glossiness. However any scratches or damage will visibly wreak havoc on the final color. Single-stage urethanes are blended with reducers and hardeners. This gives the paint durability and a shiny gloss with only one application necessary. Most urethanes will take just a few coats and dry at a rapid rate. They can also be wet-sanded to ensure minor defects and small blemishes are not visible.
It is hard to tell how many coats will be required as the number will vary depending on the color chosen for the project. Whether you decide to use a single-stage urethane or multi-stage paint systems, ensure the undercoats are properly prepared. This will ensure your new paint comes out looking pristine with a reflective shine.
Urethane should be discussed in depth, but for our purposes, this simple overview will aid the painter in deciding which paint choice is optimal. It is also important to remember to undertake any paint job under the right conditions. This is where a paint-booth rental from a reputable auto body repair shop will aid you immensely.
Not only will they provide you with an area to safely and cleanly paint your vehicle, but most will also have heaters or infra-red lamps installed to ensure the maximum cure for your urethane paint. With a little attention to detail and some patience, you should be on your way to an awesome paint job.
For more info on DIY auto painting project please go to http://www.learnautobodyandpaint.com to obtain additional free trainings, e books and much more!
By Tony Bandalos
No one wants to buy a costly paint only to find out it is the incorrect one. Luckily, with a little research and the right FAQ, any DIY auto painter can easily discern which paint is the right fit. Acrylic enamel auto paint and its cousin acrylic lacquer are the most common choices for restoration projects while urethane is recommended by industry professionals for DIY auto painting projects.
As acrylic enamel auto paint is old technology, one may find themselves drawn to the urethane option. Unfortunately, if you are in possession of an older or classic vehicle, you will most likely be going with the acrylic enamel option. While the base coat/clear coat is strongly recommended by industry professionals, single-stage urethanes are a viable option.
They do not require an application of clear coat to add glossiness. However any scratches or damage will visibly wreak havoc on the final color. Single-stage urethanes are blended with reducers and hardeners. This gives the paint durability and a shiny gloss with only one application necessary. Most urethanes will take just a few coats and dry at a rapid rate. They can also be wet-sanded to ensure minor defects and small blemishes are not visible.
It is hard to tell how many coats will be required as the number will vary depending on the color chosen for the project. Whether you decide to use a single-stage urethane or multi-stage paint systems, ensure the undercoats are properly prepared. This will ensure your new paint comes out looking pristine with a reflective shine.
Urethane should be discussed in depth, but for our purposes, this simple overview will aid the painter in deciding which paint choice is optimal. It is also important to remember to undertake any paint job under the right conditions. This is where a paint-booth rental from a reputable auto body repair shop will aid you immensely.
Not only will they provide you with an area to safely and cleanly paint your vehicle, but most will also have heaters or infra-red lamps installed to ensure the maximum cure for your urethane paint. With a little attention to detail and some patience, you should be on your way to an awesome paint job.
For more info on DIY auto painting project please go to http://www.learnautobodyandpaint.com to obtain additional free trainings, e books and much more!
By Tony Bandalos
0 comments :: The Three Types Of Paint: Which Is Best For Your DIY Auto Painting Project?
Post a Comment